Posts Tagged ‘Villanova’

How to Maintain High Efficiency Filters to Reduce Stress on Your West Chester Heat Pump

Monday, January 2nd, 2012

The filter on your heat pump is an integral part of your West Chester home’s comfort system. Without that filter, the device will quickly be subjected to an influx of debris and contaminants that can get into the machinery and the air being filtered into your home. As a result, you need to make sure you properly maintain the filters to reduce stress on your heat pump.

Change Your Filters

High efficiency filters are designed to remove as much of the airborne contaminants in the air as possible. This is fantastic for keeping your indoor air clean. But if you don’t properly maintain the filter, air quality can worsen and your heat pump is put under unnecessary stress. Specifically, the extremely tight knit filter, designed to stop nearly anything from getting through, gets clogged.

Now your heat pump is forced to work much harder to draw the air it needs from outside and heat or cool your West Chester home. On top of that, the filter is filled with contaminants that can start to leak back into the air supply, actually making your indoor air quality worse than it would be otherwise. That’s why it is so important to clean your filters on a regular basis (for permanent filters) and replace them if they are one time use.

Recommended Filters

You have options as to which types of filters you use for your heat pump. Filters come in multiple options, from super high MERV rated filters that trap up to 99% of all contaminants as small as 0.3 microns.

Electrostatic filters are especially efficient because they extract contaminants of all types – from dust and mold to smoke and gas fumes. A good filtration system should effectively remove anything from the air without needing replacement too often.

Permanent filters tend to offer the best protection against airborne contaminants and generally need to be cleaned once a month. HEPA filters are often permanent and while each filter is different, these are often extremely effective at minimizing contaminants in the air without putting stress on your heat pump.

Tags: , , , , , ,
Posted in Services | Comments Off

HVAC Safety the Whole Family Should Know: Some Pointers from Haverford

Wednesday, November 16th, 2011

If you think the most important thing a heating and cooling (HVAC) system can do is to provide an comfortable environment in your Haverford home, you are right. But there is another thing an HVAC system does that is very important and it affects your entire family. It provides a safe indoor environment, too.

Besides warmth in the winter, a finely-tuned HVAC system can clean and filter the air you breathe. That’s important to people who suffer from allergies and is especially important for minimizing the spread of germs that cause colds and the flu. The key phrase in this paragraph is finely-tuned. If your HVAC system is not working correctly – out of tune – it can cost you a great deal in monthly utility bills and can be harmful to your health.

It is important for you and your family members to understand the basics of HVAC system maintenance so you can all understand the symptoms of improper maintenance and its consequences. For example, if anyone in your home is suffering from flu-like symptoms or are constantly drowsy or listless, they may be suffering from the a silent killer: poisonous carbon monoxide gas. This gas is formed during incomplete combustion of fossil oils like natural or propane gas. A malfunctioning furnace can emit carbon monoxide gases and you may never even realize it, until it is too late. Long-term exposure to the gas can cause brain damage and/or chronic sleepiness. It some cases, it can even cause death.

You may be able to diagnose the problem, but you aren’t qualified to test and repair a furnace that is creating deadly carbon monoxide gas. Your best bet is to call a qualified HVAC contractor who can diagnose the furnace and offer repair or replacement suggestions. But there are things you can do to prevent the build-up of carbon monoxide gas.

Check all exhaust vents, like chimneys and flues for any blockages. A blocked or partially blocked vent can cause the build-up of carbon monoxide gas. And never, EVER, use a gas or propane powered heater in an unvented area of your home. These types of heaters create various levels of carbon monoxide gas that needs to be circulated out of each room and replaced with clean, fresh air. So, your family can actively ensure that there is no debris, bird’s nests, animals, leaves, or snow in the ventilation system.

You can also “help” your HVAC system by keeping vents clean by vacuuming dirty vent grilles and, in general, keeping the home clean. The cleaner the home, the easier it is for your furnace to do its job and the easier it will be for you and your family will breathe. These are a few easy maintenance tips will keep you and your family warm – and safe – this fall and winter.

Tags: , , , , ,
Posted in Services | Comments Off

Heating System Preventative Maintenance: Some Pointers from Narberth

Monday, November 7th, 2011

Ben Franklin once said, “An ounce of prevention is worth a pound of cure.” His famous quotation can apply to many things in life, including the heating system in your Narberth home. While heating systems in Ben Franklin’s time consisted of wood burning stove and fireplaces requiring little maintenance, today’s sophisticated furnaces and building controls require a good dose of preventative maintenance in order to avoid mechanical failures and inefficient operation.

For example, a furnace runs better and lasts longer when you maintain a regular schedule of filter cleaning or replacing. A dirty or clogged filter can restrict airflow from the furnace into your home’s ventilation system and cause the furnace to work harder, putting more wear and tear on it and taking months, if not years, off of its useful life. If your furnace uses disposable filters, check them every month and replace them if necessary. If your furnace uses an electronic filter that requires cleaning, check it on a monthly or semi-monthly basis and clean it with soapy water and a hose. Be aware of the change of seasons which could add extra pollutants into the air like pollens, ragweed, and cottonwood. This debris easily finds its way into the filters and creates an unhealthy indoor environment.

You can also perform a simple visual inspection of working components inside your furnace by removing the access cover and checking – with a flashlight – for loose fan belts, frayed electrical wires, or a build-up of dirt and dust. Simple solutions include tightening or replacing belts, repairing wiring, and vacuuming out dirt and dust with a hose attachment. All of these actions will keep your furnace working better and prevent future failures.

You can also do a visual check of your home’s ventilation system, paying close attention to any cracks in duct seams or holes in flex ductwork. Using sealing cement or duct tape can usually fix these problems and allow for better, unrestricted air flow. Again, these actions will help your furnace work more efficiently and avoid premature failures.

Maybe the best advice for preventing heating system breakdowns is to have a regular maintenance schedule with a local qualified heating contractor. Most contractors can set you up with annual furnace and ventilation system inspections. Having a service agreement – as a rule – gives you priority emergency repairs and discounts on parts and services. Besides that, planned maintenance is also preventative maintenance, something that will give you peace of mind in the long run.

Tags: , , , , , ,
Posted in Services | Comments Off

Heat Pump Filter Care: Some Advice from Ridley Park

Wednesday, October 19th, 2011

On the whole, heat pumps are a efficient, durable and effective way to heat your Ridley Park home. They are built to run all year round without needing any more maintenance than your average furnace or air conditioning system and they have an average lifespan comparable to those other types of home comfort systems as well.

That’s not to say that there aren’t things you can do to keep your heat pump in good working order, however. Keeping up with the professional maintenance visits is an important step to take along these lines to be sure, but there are also some other things you can do on your own as well to help ensure the continued efficiency and health of your heat pump system.

Proper filter care is an important part of keeping your heat pump working the way it should. If you don’t have a heat pump yet but are thinking of getting one, make sure you have the installation technician show you where the filter is located and how to replace it.

If your system’s already been in place for some time, you can still find out how to care for the filter from your annual maintenance technician or you can probably even find it on your own by taking a close look at your heat pump. The filters are meant to be removed on a regular basis so they’re typically not hard to get to. However, you should always be sure that all of the power to your heat pump is turned off before you open it up to try and find, replace or clean the filter.

Most heat pump filters are meant to be changed or cleaned about once every 90 days or so. However, the specific requirements for each system can vary considerably, so you should be sure to find out what is recommended for the model of heat pump that you have.

Also, you’ll want to know what type of filter you have so that you can purchase the appropriate replacement. The model number for each filter should be clearly printed on it, so simply slide your current filter out and make note of the number so that you can purchase the correct type as a replacement.

Most heat pumps have replaceable filters, but some still do have permanent filters that are meant to be cleaned and then returned to service. If you have one of these types of filters, be sure to read the instructions for cleaning carefully before proceding.

Tags: , , , , , ,
Posted in Services | Comments Off

Common Problem Areas for HVAC Systems: A Guide From Boothwyn

Friday, September 9th, 2011

No one wants to have to call a contractor in to inspect their Boothwyn home’s HVAC system. Problems in heating or air conditioning tend to be costly and time consuming to fix. But, the longer you wait, the bigger the problem is likely to get. So, it’s important to act quickly when you suspect a problem with any of the following common sources in an HVAC system:

  • Power Lines – Your HVAC system uses a lot of electricity so if it stops working, turns off suddenly or frequently shuts down, it may be a power issue. If the system stops working at any point, check your breaker box for a blown fuse or tripped breaker. You should also check the electrical line to your HVAC system. If you see any damage from animals, weather or otherwise, call a professional immediately.
  • Gas Lines – if you have gas furnaces and appliances, gas supply problems can be a major issue for your HVAC system. There are a number of safety measures in place in a gas line system. The gas valve connecting the gas line to your furnace has as safety shutoff switch. Your home has a carbon monoxide detector. A pressure drop in the system will also cause a shutoff. So, the most common problem you would face with a gas line is that is stops providing gas, usually because there is a problem in a component. If this happens, call the gas company immediately to check your system, and of course if you smell a leak, leave the house and call the emergency line for your gas company.
  • Drains – Air conditioners have drain pipes that release the condensed water that builds up inside as they run. However, over time, that drain can clog up if it’s not properly maintained. If you have a central air conditioning unit, check the drain pan once every week or so to make sure it is draining properly. Frequently, this drain pipe will be located higher in your home so that it can drain properly away from the property. Call a professional if it continues to clog or fails to drain at all.
  • Venting – Vent problems can result in more than just stuffy air. Clogged or dirty vents are fire hazards and they can decrease indoor air quality, making it both uncomfortable and unhealthy inside. Vents and ductwork should be cleaned annually to avoid the buildup of debris and sediment. Additionally, you should do a visual inspection once a month to check for debris and vacuum the space where possible.

Most of the problems commonly associated with your HVAC system need to be checked and repaired by a professional. However, by remaining vigilant and checking them regularly, you can avoid a much bigger problem and subsequent repairs.

Tags: , , ,
Posted in Services | Comments Off

How Do EER and SEER Work? A Question From Brookhaven

Monday, August 15th, 2011

If you’ve looked for a new air conditioner in Brookhaven recently, you probably noticed each unit comes with an EER or SEER rating. The former is for room air conditioners and the latter for central air conditioning units. In both cases, the number is a measure of how efficiently the system uses electricity. Effectively, if you buy a system with a high rating, you spend less on electricity. Of course, there are tradeoffs. The higher rated machines tend to cost much more, so as a homeowner, you’ll have to evaluate how much you can spend now and how long it will take to save money from that investment.

How EER and SEER Are Measured

These numbers are required by the government to tell you, the consumer, how many BTUs per hour the device can use for every watt of electricity drawn. The more BTUs a system can use, the better for your bill.

Let’s say you want to buy a 10,000 BTU system to cool your living room and dining room. A pretty standard number for a single room unit is 11, meaning the 10,000 BTU system would use about 900 watts per hour to run at full capacity. We figure this out by dividing the BTUs (10,000) by the watts (900).

There is a lot of math to do here, so many people simply look for a higher number within their price range. But, at what point is the upgrade really worth your extra money?

Choosing the Right Energy Efficiency Rating

The easiest way to describe this is to compare two similar devices with different EERs:

Air Conditioner 1 Air Conditioner 2
BTUs 12,000 12,000
EER 9 11
Watts 1333 1091
Price $300 $450

In this particular case, we can spend more for a device that is the same size but uses less electricity. The question then is whether that increased expenditure will pay off in the short term. Let’s assume each device would be operated for 10 hours per day for 30 days in a typical summer month. That’s 300 hours of operation. If the average cost per kWh in you are is $0.09, it will take 4 hours for the first air conditioner to consume 1 extra kilowatt of electricity equal to an additional $0.09. If your air conditioner runs for four months out of the year, we know that it will operate for a total of 1200 hours. That means:

[(1200 hrs x 242 watts) / (1000 watts/kw) ] x $0.09/kWh = $26

So, you save roughly $26 per year from that high efficiency unit. With a $150 price difference, you will break even after 6 years (though probably sooner if the price of electricity goes up).

Don’t forget, however, that central systems are a much more efficient option with SEERs of up to 16.5 and much larger BTU areas to cover. The savings there can add up very quickly. If you need more information to decide which air conditioner is right for you, talk to your air conditioning professional.

Tags: , , , , ,
Posted in Services | Comments Off

What Are the Benefits of Having a Ceiling Fan in Villanova?

Friday, August 5th, 2011

There are definitely some days in Villanova every year that would be pretty miserable to get through without the benefit of a central air conditioning system in your home. And since you have a central air conditioning system in place, it may seem silly and unnecessary to think about having ceiling fans put in as well. There are actually quite a few benefits of having ceiling fans, however, regardless of what kind of central air conditioning system you have or how powerful it is.

Ceiling fans are not too expensive to put in and they take very little energy to run. But the breeze they produce can have a powerful cooling effect on a room. In fact, running a ceiling fan can make you feel up to eight degrees cooler than you would otherwise.

While this certainly is not enough on a really hot day, it can actually be plenty when the weather is not all that hot. But even if you have your central air conditioning turned on, you can still benefit from running your ceiling fan. That is because the cooling effect of the ceiling fan can allow you to turn up the thermostat for your air conditioner, resulting in a considerable savings on your cooling bill.

Because ceiling fans are so cheap to run, they can complement central air conditioning systems nicely and will provide significant savings over time. Running an air conditioning system alone can certainly keep you cool and comfortable all summer long, but it will also cost you considerably more than if you were to throw a ceiling fan into the mix as well.

And that is not all a ceiling fan can do to help you stay comfortable all year long. In fact, ceiling fans can also be of use in the winter because they help to return the warmer air to the lower parts of your rooms. Warmer air will naturally rise, meaning that your heating system will have to work harder and harder to keep the air in the lower part of your room warm. But with a ceiling fan in place, that warmer air will be re-circulated throughout the house to keep you warmer and help keep your energy bills down at the same time.

Tags: , , , ,
Posted in Services | Comments Off