Posts Tagged ‘St. Davids’

« Older Entries

Narberth HVAC Question: How Much Ventilation Do I Need for My House?

Friday, January 27th, 2012

By now you’ve probably heard how important it is to have good ventilation in your Narberth home. Especially if your home was built in the 1980s or early 1990s when ventilation issues were prevalent, you may not have enough clean air moving through your home. But, how much ventilation do you need? What is enough and if you don’t have it, how do you ensure your home is retrofitted properly?

How Much Ventilation?

Most recommendations for ventilation come from the Home Ventilation Institute, which provides a series of standards of measurement for builders and contractors retrofitting homes for better ventilation. Here are some of their recommendations and how they might apply for your home:

  • Bathroom – Small bathrooms (less than 100 sq. ft) need 1 CFM per square foot of bathroom. The number goes up for each fixture if you have a large bathroom.
  • Kitchens – Your kitchen range needs at least 100 CFM if against the wall and upwards of 150 CFM if on an island.
  • Ventilators – If you have an HRV for your home, you should have at least 100 CFM for 2,000 square feet and another 50 for every 1,000 square feet of home size being ventilated.
  • Home Ventilators – The actual volume of CFM for ventilators depends on the type of ventilator being used. For example, a whole house ventilator needs upwards of 6,000 CFM for a 2,000 square foot home. Attic ventilators need 1,400 or more.

So, what does this mean for your home? It means in general that you need a lot of ventilation and that the best way to get it is through mechanical ventilation techniques combined with your air handler and ductwork.

Especially if you recently added insulation and weather proofing to your home but have not yet updated your ventilation, you might have a major air quality problem, so have a Narberth professional measure your home’s air flow as soon as possible.

Tags: , , , , ,
Posted in Services | Comments Off

Oaks HVAC Contractor Tip: Heat Pump Load Calculation

Wednesday, January 4th, 2012

When purchasing a heat pump in Oaks, the first thing you should do is determine what type of heat pump you want and how big it needs to be to provide ample heating and cooling to your home. If you’re unsure what you need, here are some tips to size a heat pump for your Oaks home’s particular needs.

The Importance of Sizing

Before buying anything, consider the cost of an oversized heat pump. A lot of homeowners opt for the biggest device on the market, but they don’t realize that they’re paying more than necessary for their device. An oversized device cycles on and off more often than is necessary and wears down much faster, resulting in an increased electric bill and faster wear on the device. It’s not good for your heat pump or your wallet.

How to Size

To correctly size a heat pump, the first step is to perform a load calculation. This is done by measuring the total volume of the rooms being heated (in cubic meters) and then determining the heating factor based on the type of insulation used.

There are different measurements depending on the type and R-rating of your insulation. For example, a single external wall without any additional insulation has a heating factor of 15. The number of external walls, the insulation in those walls and/or the ceiling and the rating of the insulation will determine the total heating factor for the room.

You will then divide the room volume by the heating factor to determine the number of KW (converted to BTUs) needed to heat that particular room.

Professional Sizing

The reason it is so important to call an Oaks heating contractor is that certain things, like poorly insulated windows, cracks in the foundation, leaks in the ducts and other issues can have an impact on the overall heating factor measurement. Additionally, the type of heat pump you choose must be effective when connected to an air handler for your entire home. A professional can make these measurements and ensure the right sized device is selected.

If you’re unsure about anything related to sizing and selecting a new heat pump for your home, call a professional in. They will perform a full load calculation and present your options for a new heat pump based on those calculations.

Tags: , , , , , ,
Posted in Services | Comments Off

When Should You Replace Instead of Repair Your Heating? A Question from St. Davids

Monday, November 21st, 2011

We all dread an expensive repair, whether it is a car that needs a new transmission, a leaky roof that needs new shingles, or electrical wiring that has been chewed up by a wild animal. We often try and put bandages on things that we know should be replaced but we just can’t afford to replace them.

The same can be said about your St. Davids home’s heating system. When your heat goes out or your home just doesn’t seem to be heating up to the setting on your thermostat, your first inclination is to check and see if it is running. Some people will put their hand over a heating vent to check for hot air while others may go into the basement or mechanical room to listen to hear if the furnace is running. Maybe there is a blockage in the ventilation system or a blown circuit breaker, two relatively easy fixes.

If the furnace isn’t working after checking the obvious symptoms, your next move is to call for service. Any qualified heating professional would be able to diagnose your problem and offer suggested repairs. Something relatively minor like a bad circuit board or blown fan motor are not real expensive repairs and are the best option versus replacing the furnace. And you may keep experiencing the same problem and getting the same repair work done – anything to avoid an expensive replacement.

But at some point the vicious cycle will come to an end. Your repair bills will begin to inch their way past the cost of replacing the furnace. You can only bandage a problem so long before it becomes “unfixable.” You may not want to pay an expensive replacement bill but consider the alternatives.

First is the obvious – it costs too much to keep repairing the furnace. Secondly, you never know when the furnace may break down and its failure to operate could have dangerous effects on the people in your home, especially if someone is sick. Third, your furnace may not be able to keep up with the heating demand due to lifestyle changes, i.e. an addition put on the house, carpeting removed and wood floors exposed, a new window, door, or skylight added, etc. Your old furnace may not have been designed to keep up with these changes and the repairs are only delaying the inevitable.

Ask yourself if everyone in your home is comfortable during cold weather. If most answer no, it may be time to consider replacing that old furnace with a new, energy efficient model that uses today’s technology – and leaves a smaller carbon footprint – to keep up with the demand for heat, in any sized building or home. Your decision to replace your old heating system could be as simple as the need to use modern technology to solve your indoor comfort problems.

Tags: , , , , ,
Posted in Services | Comments Off

What to do if Your Heating System Breaks: A Guide from Malvern

Friday, November 4th, 2011

What if the heart of your Malvern home’s heating system – the furnace – stops working? The warm air that used to flow from your vents has been replaced by a chilly draft. It isn’t time to panic, but it is time to take action. Before you do anything, determine why the furnace stopped working. It may be something as simple as a tripped circuit breaker in your electrical panel. Check the circuit breakers first.

The pilot light in your furnace may have blown out. It can be re-lit if you follow the directions in your furnace owner’s manual. You can find answers on how to re-light a pilot light on the Internet, too.

If the shutdown has not been caused by an electrical or pilot light failure, there is still no need to panic. But another obvious question is: did you pay your last gas bill? Maybe you had a shutoff notice and either ignored it or forgot about it.

Now that you are convinced that the furnace has pooped out, here are some things you should do. First, find the name of a qualified heating and cooling professional. If you already use a heating contractor, contact them and schedule a service call.

While you are waiting for help to arrive, ensure that everyone is safe and accounted for. Make sure pets are nearby and protected from the cold, too. What you don’t want to do is use any appliance to keep you warm that is not designed to keep you warm, like a stove. If you have electric space heaters or propane heaters, carefully locate them in a well vented room (windows open a bit or portable fans circulating air). You don’t want any build-up of gases from fossil burning appliances, gases which could contain deadly carbon monoxide.

Huddle up everyone into a room and break out lots of blankets. You may even want to make an “adventure” of this – find a movie to watch and pop up a bunch of popcorn.  If your waiting time is more than 24 hours, you might want to call up a friend or relative and make arrangements to spend the night with them.

The main thing to remember is not to panic. Most qualified heating contractors, knowing the circumstances, will send out a repair person in a matter of minutes or within one or two hours. Just remember to avoid keeping warm by using unvented heating devices.

Tags: , , , , , ,
Posted in Services | Comments Off

The Energy Star Label: A Tip From Thornton

Monday, September 19th, 2011

The Energy Star program is a joint program of the Environmental Protection Agency and the US Department of Energy. The program’s goal is to help consumers, such as Thornton homeowners, save money and protect the environment through energy-efficient products and practices.

The best-known aspect of the Energy Star program is the Energy Star label, which is awarded to appliances and other items that are significantly more efficient than average. Energy Star efficiency guidelines vary depending on product category, but in general, Energy Star products use 20%-30% less energy than minimum federal standards.

The Energy Star guidelines were designed both with energy efficiency and performance in mind. While low energy use is one of the most important criteria for selecting Energy Star appliances, product performance, features, warranty, safety, and durability are also taken into account. Price is also a factor: if a product costs significantly more than other products in its category, it will only receive the Energy Star label if the up-front cost will be recovered through savings in operating costs within a reasonable amount of time.

The first Energy Star labels were given to computers and monitors in 1992. Now labels can be found on many other products, including:

Energy Star products can be found wherever appliances and electronics are sold. Look for the blue and white Energy Star label. You can also look for the yellow EnergyGuide label that is affixed to most heating and cooling systems and household appliances. This label is created by the Department of Energy and shows a product’s annual cost of operation compared to similar models. It will often indicate whether a product is Energy Star.

It’s important to note that while an Energy Star label indicates that a heater, air conditioner, or household appliance is more efficient than the minimum guidelines, it does not always mean that you are getting the most energy efficient option on the market. If you are making a major appliance purchase, use the Energy Star label to be sure every model on your “short list” is energy efficient. Then, look carefully at the EnergyGuide label to compare the efficiency of the models you are considering.

The EPA has also extended the Energy Star label to cover new homes and commercial and industrial buildings. To qualify for the Energy Star rating, a new home must use at least 15% less energy than standard homes (built to the 2004 International Residential Code). Energy Star homes usually include insulation, high-performance windows, energy-efficient heating and cooling systems, appliances, lighting, and water heaters.

The Energy Star standards and label have been recognized in many other countries, including Canada, Australia, Japan, New Zealand, Taiwan and the European Union.

Tags: , , , , , ,
Posted in Services | Comments Off

Looking at Moving to a New House – What to Look for in a Furnace? A Question From Lenni

Friday, September 16th, 2011

What are the Minimum Efficiency and Maximum Age of a Furnace?

Most new homeowners in Lenni overlook simple things like the maintenance and age of their furnace. However, if you know exactly what your furnace should do and how long it should last, you’ll be better prepared to setup your maintenance visits and start looking for a new model. So, how do you tell what your furnace should provide? Here are some easy tips.

The AFUE Rating

Furnaces built in the last 20 years come with an AFUE rating that tells you how much of the fuel they consume is effectively converted into heat. If your home’s furnace has an AFUE of 80% that means it will effectively convert 80% of the fuel it consumes into heat. However, if your furnace has an AFUE of 98% it will convert 98% of the fuel it consumes into heat.

These ratings are designed to show you what to expect from your system from month to month. If the furnace suddenly starts using far more energy and produces the same amount of heat, you know that the AFUE is no longer accurate. It’s either a sign of a problem or that your furnace needs to be replaced.

Maximum Age

No manufacturer likes to give a maximum age for their furnaces because they can last for much longer than originally rated in many cases. However, most furnaces will come with at least a 10 year limited warranty for the heat exchanger and a 10 year limited warranty for the parts. So, if you take good care of your system, they expect it to last at least 10 years.

However, if you maintain your system annually, check the filters throughout the winter and don’t push it too hard when it gets cold out, your system could last even longer than the limited warranty, allowing you to enjoy an efficient furnace for years to come.

Moving In

While you’ll have your new home inspected, a working furnace doesn’t necessarily mean a good furnace. Make sure to learn just how old the furnace is, how much maintenance it needs, and the level of efficiency you can expect. It may be in your best interest to simply have it replaced now and start saving on your energy bill immediately instead of two or three years down the road as it continues to get worse.

Tags: , , , ,
Posted in Services | Comments Off

Things You Should NOT Do Yourself Around the House: A Guide From Ardmore

Wednesday, September 14th, 2011

Everyone wants to feel handy around the house and there are a lot of great things you can do to help keep your Ardmore home and its various systems in tip top shape, but not everything should be on your to do list. Some tasks are dangerous or require special equipment and should only be performed by professionals. Here is a list of some such tasks and why you should avoid them:

  • Service a Gas Appliance or Furnace – If it involves a gas line, call a professional. This goes doubly so for live electrical work. You should always call someone who has the specific certification and licenses needed to work on your gas or electricity systems. They know the safety precautions and if there is a problem they will recognize it immediately and act fast to keep everyone safe.
  • Annual Maintenance – Filter changes, cleaning and other small jobs can be on your to do list, but big time maintenance done annually on your exhaust pipes, furnace or air conditioner should be done by a professional who has the equipment for it.
  • Duct Cleaning or Patching – You can clean the vents and the entry lines at your air handler just fine, but how will you reach the middle of your ducts without an industrial strength vacuum and duct cleaning system? Repair is similarly hard without the right equipment.

There are a lot of fun things you can do around your home to keep it in good condition, but for the big stuff, always call a pro – if not for the sake of your home, for your health and wellbeing.

Tags: , , ,
Posted in Services | Comments Off

Do Heat Pumps Work for Air Conditioning?A Question From Brookhaven

Monday, September 5th, 2011

It’s possible that in the course of your search for a new air conditioning system in Brookhaven, you read or were told about heat pumps. Doesn’t sound right, does it – heat pumps providing cooling for your home? Regardless of the seeming misnomer, heat pumps are actually much older and more reliable cooling technology than you know. And once you understand how these units work, the name makes much more sense.

What Is a Heat Pump?

Technically every refrigerant containing air conditioner is some form of heat pump. A heat pump is a device that removes heat from one area and transfers it to another. So, in the case of your air conditioner, warm air cycles into the condenser, the heat is removed, and the cooled air is circulated back through your home. The actual science behind this is slightly more complicated, but the gist is simple – cold air isn’t produced and then pumped into your home; warm air is removed.

Your refrigerator and freezer operate under the same principle. It works so well that it’s been a standard technology for nearly 100 years, albeit with quite a few upgrades and enhancements. So, if an air conditioner already is a heat pump, why are these devices called something different? Because heat pumps can do so much more.

Heat Producing Heat Pumps

A true heat pump can work in two directions. It can extract heat from your home or it can extract heat from outside and pump it into your home. A true heat pump offers year round climate control because it both heats and cools – not too shabby if you think about the cost of a furnace and central AC system. And with modern green technology, heat pumps can even be connected to geothermal systems that draw their energy from the earth – saving a tremendous amount of money.

So, back to the main question – should you purchase a heat pump for your air conditioning needs? The short answer is “it depends”. For the most part, a heat pump is comparable to the same air conditioning model in terms of energy efficiency and capacity. The major difference is its ability to heat your home. So, if you are interested in ditching the furnace or boiler, it may be a great upgrade. If not, a standard air conditioner can get the job done equally well.

Tags: , , , ,
Posted in Services | Comments Off

Federal Energy Efficiency Rebates Explained: A Guide From Broomall

Wednesday, August 17th, 2011

You’ve probably seen the advertisements and heard the sales pitches all over Broomall. Upgrade your furnace, air conditioner, water heater, or insulation and receive a federal rebate on your taxes for a percentage of the installation cost. The government is seriously invested in improving the energy efficiency of the country, cutting electric bills and helping people stay comfortable. Here’s a quick look at some of those rebates and how you can tap into them.

Energy Efficiency Credits

There is a standard tax credit of 10% of the cost up to $500 or a specific amount between $50 and $300 for any upgrade made to your existing home for heating, ventilation, air conditioning, insulation, roofs, or water heaters. These upgrades must be made on an existing home in which you currently live – rentals and new construction homes are not eligible.

Green Energy Credits

Even better credits are available if you plan on installing a geothermal heat pump, wind turbine or solar system – either PV panels or solar heating. The tax credit here is 30% of the cost with no upper limit. This applies to any existing or new homes and can be applied to both primary and secondary residences.

Are the Tax Credits Worth It?

The big question is whether these credits are worth the investment in a brand new system? For the most part, it depends on your particular situation. If you have a 30 year old furnace and are planning on an upgrade anyways, why not take advantage of a nice rebate and get a more energy efficient system to go with it? However, if you just replaced your furnace three years ago and it works very well with a high energy efficiency rating, it might not be worth the investment.

Learn More

The Energy Star program run by the EPA contains detailed breakdowns of the 2011 tax credits, including what systems are eligible and how to go about claiming them on next year’s taxes. Learn more by visiting their official page.

Tags: , , , , , ,
Posted in Services | Comments Off

Tips for Upgrading Your Central Air Conditioner in St. Davids

Monday, August 1st, 2011

When the time comes to upgrade your central air conditioner, in St. Davids or anywhere else, you will have a lot of things to take into account. If you were generally satisfied with the performance of your old system, it can be very tempting to stick with a similar model. But if you do not examine all of the options out there right now, you may very well be missing out on a great deal.

If you already have a central air conditioner in place, chances are that you also have ductwork throughout your house. In that case, you will probably be better off with a packaged air conditioner as opposed to a split system. If it is a split system you are replacing, however, you should probably keep your search limited to other split systems. Installing a packaged air conditioner when you do not already have ducts in place can dramatically increase the overall cost of the project.

You will also want to make sure that the system you choose is compatible with the heating system and air handler that you already have in place. Most central air conditioning systems can be integrated easily with all types of heating systems, but you should still check to make sure this will not be a problem, particularly if you have an older heating system.

In terms of picking out the right new system for your home, energy efficiency is probably the main factor to consider. While just about every air conditioner on the market right now will be much more efficient than the unit you are replacing, you want to make sure you get a model that will provide you with the optimal savings in the long run.

This does not necessarily mean that you should go out and buy the most energy efficient air conditioner out there. In fact, because the more energy efficient units are also typically more expensive, you may not actually save money by going that route. But you will do well to choose a unit that will save you enough monthly to offset the installation costs and for most people, that means that you will want an air conditioner that is either a SEER 14 or SEER 16.

Of course, the actual amount of money you will save as you move up through the SEER rankings depends on how much you use your air conditioner to begin with. If you live somewhere with very hot weather and you use your unit for a large chunk of the year, it may very well be worth it for you to opt for a very high efficiency model.

Tags: , , , ,
Posted in Services | Comments Off

« Older Entries