Posts Tagged ‘Glen Riddle Lima’

How to Calibrate Your Thermostat: A Tip from Wallingford

Monday, November 14th, 2011

Have you ever set the thermostat in your Wallingford home to a desired temperature and “hoped for the best?” Maybe it’s because the temperature setting you expected this finely tuned instrument to maintain just isn’t right. You may see 70 degrees on the thermostat but the home feels more like 65 degrees. In fact, if you used a hand-held thermostat, you might get real proof that your thermostat is not working like it should.

There are reasons for a malfunctioning thermostat and solutions to correct them, namely calibration. First, let’s look at some reasons why a thermostat can be out of kilter.

The first thing to note is that thermostats are very sensitive instruments and change to the slightest changes in temperature. An incorrectly installed thermostat or one that is accidentally bumped or jarred can malfunction. It may wind up out of level, causing it to operate incorrectly. Possibly the most common problem affecting accuracy is a build-up of dirt, which can affect the calibration of the thermostat. Other problems may be caused by loose wiring.

Here are some steps you can take to check your thermostat for accuracy and recommended actions.

  1. Use a standard glass thermometer to check the room temperature. You should mount it on the wall nearby your thermostat and use some padding to keep it from actually coming in contact with the wall, which could affect the readings.
  2. Wait 15-30 minutes for the thermometer to adjust to the temperature and enable it to give the most accurate reading. Once the time has elapsed, compare its temperature reading to that on your thermostat.
  3. If there is more than a one degree variation, your thermostat may be dirty. Remove its faceplate and examine it. If there is dirt or dust inside, blow it out. If you can reach the contact points, you can clean them with a new dollar bill (and speaking of dollars, a clean and accurate thermostat will make your furnace run more efficiently and save you money on your utility bill).
  4. Some thermostats use a mercury vial which can indicate if the thermostat is level or not. If it is not level, a simple adjustment using a screwdriver may do the trick. In the worst case, you may have to remove the thermostat and drill a new hole to reinstall the mounting screw in a different location.
  5. Now that you have made these corrections, check both thermostats to see if the temperatures match. If they don’t, try steps 3 and 4 again. If that still doesn’t work, your problem may be more than just a dirty, lopsided thermostat. You may need to replace the thermostat – or even look at the heating system in its entirety. It could be time to call a professional heating contractor to check out your entire system.

Today’s thermostats have few working components but are very sensitive, advanced instruments. It takes little to throw off a thermostat but luckily, it takes little effort to correct the resulting problems.

Tags: , , , , ,
Posted in Heating | Comments Off

A Guide From Glenolden: Types of Filters

Wednesday, September 28th, 2011

Installing air cleaners in your Glenolden home is a great way to make sure the air your family breathes every day is safe and free of contaminants. But you shouldn’t just go out and buy the first air filter you see. When it comes to quality air filtration, HEPA filters are the industry leaders, and for good reason. They can remove up to 99.97% of indoor air contaminants that measure 0.3 microns or larger, a phenomenal success rate unmatched by any other filters on the market.

Proper HEPA Filter Practices

To be effective, even HEPA filters need to be installed and maintained properly. Consulting with an HVAC professional is the best way to ensure that the air filtration system you get is completely compatible with your home heating and cooling system. The filter must also be installed in the appropriate place so it can catch the most contaminants. Especially if you have a forced air heating and cooling system, there are a lot of potential locations for your filters. A good HVAC professional can help you determine which spots will serve you best.

Changing Your HEPA Filters

Once your filtration system is in place, you should maintain it properly so it continues to catch and remove all those unwanted particles from your indoor air. Keeping up with the proper filter changing schedule is a big part of this. Every HEPA filter comes with manufacturer’s recommendations on how often the filter needs to be changed. Prefilters often need to be changed more often, sometimes even once every 90 days, so you should find out if your system has one of these as well.

Many HEPA filters only need to be changed once every year or two, but the conditions in your home can make it necessary to change them more often. For example, if your home has a lot of dust or other specific air contaminants, you may need to change your HEPA filter as often as once a year.

Both HEPA filters and prefilters are quite easy to remove and replace. If you’re not sure how to do it, have your technician show you the next time they come out for a routine maintenance visit or when they put install the system. As long as you replace your filters regularly, you should have no trouble maintaining high indoor air quality.

Tags: , , , , , ,
Posted in Indoor Air Quality | Comments Off

Tips for Upgrading Your Central Air Conditioner in St. Davids

Monday, August 1st, 2011

When the time comes to upgrade your central air conditioner, in St. Davids or anywhere else, you will have a lot of things to take into account. If you were generally satisfied with the performance of your old system, it can be very tempting to stick with a similar model. But if you do not examine all of the options out there right now, you may very well be missing out on a great deal.

If you already have a central air conditioner in place, chances are that you also have ductwork throughout your house. In that case, you will probably be better off with a packaged air conditioner as opposed to a split system. If it is a split system you are replacing, however, you should probably keep your search limited to other split systems. Installing a packaged air conditioner when you do not already have ducts in place can dramatically increase the overall cost of the project.

You will also want to make sure that the system you choose is compatible with the heating system and air handler that you already have in place. Most central air conditioning systems can be integrated easily with all types of heating systems, but you should still check to make sure this will not be a problem, particularly if you have an older heating system.

In terms of picking out the right new system for your home, energy efficiency is probably the main factor to consider. While just about every air conditioner on the market right now will be much more efficient than the unit you are replacing, you want to make sure you get a model that will provide you with the optimal savings in the long run.

This does not necessarily mean that you should go out and buy the most energy efficient air conditioner out there. In fact, because the more energy efficient units are also typically more expensive, you may not actually save money by going that route. But you will do well to choose a unit that will save you enough monthly to offset the installation costs and for most people, that means that you will want an air conditioner that is either a SEER 14 or SEER 16.

Of course, the actual amount of money you will save as you move up through the SEER rankings depends on how much you use your air conditioner to begin with. If you live somewhere with very hot weather and you use your unit for a large chunk of the year, it may very well be worth it for you to opt for a very high efficiency model.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

What to Look for When a Home is 20 Years Old

Wednesday, July 27th, 2011

The older the home you look for, the more careful you need to be in your research. Of course, if you can avoid any of the major issues that crop up in 20 year old constructions, you can come away with a fantastic home that is comfortable, easy to modify and in an established neighborhood with good schools, plenty of trees, and a solid maintenance history.

The Stuff to Watch Out For

When a home reaches 20 years old, there are quite a few problems you’re likely to run into. Consider the fact that the furnace, air conditioner, and roof are all designed to last at least 20 years. That means that unless they were highly maintained and regularly inspected they may be ready for replacement right about now.

So, when looking at homes, have any prospective purchases fully inspected for things like dry rot, termites, old furnaces and air conditioners and so on. You are also likely to run into older bathrooms and kitchens that need to be updated. For most people this is simply an inconvenience, but for those on a tight budget it can be a deal breaker.

What You Should Want

Of course, there are a lot of benefits of an older home if you can find them. Specifically in the 20 year old timeframe, you’ll find that trees have matured, the yard is well established and if the neighborhood is good, local schools will have plenty of support in the community. These are all factors you should take into consideration when looking for an older home.

Maintenance is something you won’t be able to avoid, especially if the home you’re looking at was not well cared for by the previous owners. However, after a couple of years, even an older home can be worked into tip top shape so that nothing will break or give out unexpectedly. Much like a used car, if you do your research well ahead of time, you can be sure you get a home that won’t have any “breakdowns” for a few years to come.

And for those out there who like to customize, keep in mind that older homes are much easier to change. Newer homes are built on prefabricated slabs that make it nearly impossible to remodel or change them, especially in highly regulated areas. Older homes are easier to remodel and often have plenty of space in which to do so.

Tags: , ,
Posted in Home Savings | Comments Off

The Advantages of an Air Conditioning System

Monday, June 13th, 2011

Just about everyone knows that air conditioning systems keep your indoor environment cool and comfortable during the hot summer months. While this may be enough of a benefit for you, there are also some other benefits to having a central air conditioning system installed in your house as well.

For instance, if you have someone in your household who is more susceptible to extreme temperatures than most people, an air conditioning system can actually help improve their overall health. Babies certainly fall into this category, as they have more difficulty than older children or adults do controlling their body temperature.

Also, many elderly people or people suffering from certain medical conditions, particularly heart conditions, are especially sensitive to the heat. If they are unable to stay cool, it can be very dangerous and damaging to their health, and an air conditioning system helps to guarantee that they will be able to stay cool and comfortable even on the hottest days of the year.

Aside from direct health concerns, air conditioning systems can also help to alleviate the symptoms of colds and allergies. They do this by controlling the level of humidity inside your home. If the air in your house is too moist or too dry, it can exacerbate cold and allergy symptoms, as well as dry out skin and make the indoor environment generally uncomfortable.

Proper humidity control is also important because it helps to ensure that any air filtration or purification system you have in place is able to operate at peak efficiency. Many of these units have a hard time extracting particulate contaminants from the indoor air that circulates through them if that air is too humid or too dry. With a state of the art air conditioning system in place, however, you will not have to worry about whether or not the humidity level in your home is out of balance.

It is also worth noting that a central air conditioning system can be preferable to a window mounted unit because it provides for a more even distribution of cool air throughout the house. Also, when you have a central air conditioning system, the condenser which is the source of most of the noise and vibrations that air conditioners make will be located outside and out of earshot. With window mounted units, on the other hand, there is really no way to block out or diminish the noise.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

What Is a Downflow vs. an Upflow Furnace?

Monday, April 4th, 2011

When you go looking to buy a furnace, you may well be surprised by how many different elements go into making a good purchasing decision. There are simply so many different kinds of furnaces available now and they each are more appropriate for certain situations. That means that finding the one that’s right for you is less about finding the one best unit than it is about finding the one that is the best match for your particular circumstances.

This applies to the type of fuel the furnace uses, its energy efficiency, and whether it’s an upflow furnace or a downflow furnace. Energy efficiency and fuel types are probably things that you’re more or less familiar with. But what are we talking about when we classify a furnace as an upflow or downflow model?

Well, it’s pretty much what it sounds like. These terms refer to the direction the air flows as it is taken in and heated by the furnace. So in an upflow furnace, the cool air is taken in at the bottom, warmed, and then expelled at the top. A downflow furnace, on the other hand, takes in cool air at the top and expels heated air at the bottom.

While this is all very exciting, it may still not be obvious what impact this will have on your decision about what type of furnace to buy. The main thing you’ll have to think about when you’re deciding between an upflow and a downflow furnace is where the furnace will be placed in your house.

An upflow furnace is generally installed in the basement so that the heated air is directed towards the parts of the house you want cooled and so that the furnace can be appropriately vented outside of the house. On the other hand, a downflow furnace would be installed in your attic for the same reasons.

So where you want to have the furnace installed is probably the biggest thing to take into account as you’re comparing these two types of equipment. Of course, whether you pick an upflow or a downflow furnace, you’ll still have to select the appropriate AFUE, size and fuel source to best meet your needs. But making the choice between upflow and downflow can at least make it easier to narrow down your options.

Tags: , , , ,
Posted in Heating | Comments Off