Posts Tagged ‘Folsom’

« Older Entries

Save Energy and Save Money This Summer in Media

Monday, April 23rd, 2012

Though we hate to admit it, we all do it without thinking: turn the AC higher instead of turning on a fan, or forget about the thermostat settings which are set to full-blast when we are not at home.  Oftentimes it is the simple things which can have the most impact, and with saving energy this is true as well.

Households throughout the US will spend somewhere between $1,200 and $2,200 per year on energy costs.  With the cost of living in many areas of life skyrocketing, it’s nice to know there are some easy ways to lower at least one household bill: the energy bill.  Of course, some of these fixes are free, and some cost a little time and energy, while others must be paid for as long-term investments.

 Free, Do-It-Yourself Energy Solutions

These quick and easy, do-it-yourself, no cost solutions produce energy saving results almost immediately!

  • Adjust your Media air conditioning thermostat to higher numbers, such as 78 while at home and 85 or higher when away.  Supplement AC usage with a ceiling or room fan, as moving air feels cooler on the skin.
  • Eliminate wasted energy by turning off appliances, lights, and equipment when not in use, unplug electronic chargers when not in use, and get rid of spare appliances such as refrigerators which are plugged in but not in use.
  • Put those dishwashing gloves away and let the dishwasher do the dirty-work!  Dishwashers use less water than washing by hand.  In addition, let the dishes air-dry rather than running through the heat-cycle to save even more.
  • Do laundry more efficiently by washing and rinsing in only cold water, and line dry instead of using the dryer.
  • Use the microwave to cook and not only speed up the cooking process, but use two-thirds less energy than a stove or conventional oven.

 Low-Cost, Economical Energy Solutions

Most of these energy saving options can be procured at the local hardware store, are fairly inexpensive, and can be easily done by any competent home-owner.

  • Replace HVAC filters regularly, according to manufacturer’s specifications.
  • Weather-proof your home by plugging air leaks on doors and windows with weather stripping, sealant, or caulk where applicable.
  • Purchase and install ENERGY STAR® certified products such as porch lights, floor and table lamps, pocket lights, and even programmable thermostats to ensure energy using items are using as little energy as possible.

 Invest in Energy Solutions

If it is important to you to save energy and money long-term and on a larger scale, there are a number of durable energy-saving investments to consider.

  • Purchase new windows, a new air-conditioning unit, refrigerator, or other household appliances which use less energy than older units
  • Install window and house shading such as patio covers, or strategically plant trees to shade the home during peak times of heat
  • Install a whole house fan which can suck cool air into the home after sundown or in the early morning in order to cool the entire house thus reducing air conditioning usage
  • Seal and insulate all household ducts in crawl spaces and attics
  • Increase or upgrade attic insulation to higher than the standard grade to keep housing temperatures more constant

To save energy also means to save money, and by following any of the simple steps listed above the average consumer can save energy and save money almost immediately. For more ways to stay this summer cool  in Media, call Cool It Heating & Air Conditioning

Tags: , , , ,
Posted in Services | Comments Off

Springfield Heat Pump Question: What is the Emergency Setting on My Heat Pump?

Monday, March 26th, 2012

While installing or inspecting your Springfield heat pump, you may have noticed that little switch or button labeled something like “Emergency Mode.” And then, you probably scratched your head and thought, “what is that for?”

Hopefully, the emergency setting is not something you will ever have to use. But, it is there for a reason, so it’s possible you may have to resort to it at some point. In that case, it makes sense to know what it is first.

Springfield Heating Repair- Air Source Heat PumpYour emergency setting is what turns on when your Springfield heat pump starts malfunctioning. The compressor will turn off so the heat pump is no longer transferring heat from the outside into your home as it normally would. Instead, the internal heating element comes on to provide your home with minimal heat until the device is working again. However, since your heat pump is now using electric resistance heating to heat your home, it is using a lot more energy. This can be very expensive, so it is best to have your heat pump fixed as quickly as possible.

That’s what the emergency setting is, but when would you use it?

It’s not a trick question. As the name implies, you only want to use this setting in an emergency. For example, if the heat pump has frozen and isn’t operating, the best course of action is to switch on the emergency mode and call a Springfield heating and air conditioning professsional to repair it.

You would also want to use the emergency mode when recovering from a power outage. Any time a heat pump is without power for more than thirty minutes the refrigerant can cool and get too thick to properly flow through the coils. Turning the pump back on in this situation can damage it, so instead you would use the emergency mode for a while to warm the refrigerant back up, then return to operating the heat pump normally.

The emergency setting is not to be used in place of a supplemental heating system. If there is an uncharacteristic cold snap, and your heat pump can’t keep up, then it makes sense to use the emergency setting to keep the house warm. However, if you live in a colder northern climate, where temperatures routinely drop below 30 degrees in the winter, you should have a supplemental heating system in addition to the heat pump. Using the emergency heat setting regularly is not a good idea.

For more information about maintaining your home’s heat pump, give Cool It Heating & Air Conditioning a call today!

Photo by k_lis: http://www.flickr.com/photos/krzlis/6589545719/

Tags: , , , , ,
Posted in Services | Comments Off

Audubon HVAC Question: How Do You Measure Your Air Cleaner’s Performance?

Friday, February 10th, 2012

Your Audubon home’s air cleaner is designed to keep your family comfortable and healthy, regardless of what contaminants make their way inside. This is important because homes these days are sealed up tightly to minimize the loss of heating or cooling, but as a result they have poor ventilation and frequently they will suffer a buildup of excess contaminants like mold, dust, pollen and dander.

To ensure you get the best possible air cleaner for your home, there are a number of measurements available to help you in the purchasing process. Let’s take a look at a couple of those measurements and what they mean.

 MERV

MERV ratings are used to measure the ability of a filter to remove dust from the air that passes through it. The higher the MERV rating, the better the filter works at removing particles. The MERV rating scale goes from 1-16 with 16 being the best possible rating you can obtain from a residential (non-HEPA) grade filter. Usually, they are designed to measure things like dander, dust, smog, wood smoke, spores, bacteria and mold.

When choosing an air cleaner, it is recommended that you look for a MERV rating of at least 8, which is good enough to remove almost all common household contaminants. Higher MERV ratings (17 and up) are found in HEPA filters which are considered among the best on the market, able to remove particles as small as 0.3 microns.

 CADR

This rating stands for Clean Air Delivery Rate and is a measurement of how efficiently the air cleaner delivers clean air for tobacco smoke, pollen and dust (the common measurements given for each device). This is not a measurement of the efficiency of the device, so much as the speed of it the device. So, the higher the CADR measurement for all three contaminants, the faster those particles are removed from the indoor air.

The best way to choose a device to match your needs is to look for a CADR rating of at least 2/3 of the size of the room you are cleaning. So, if you are cleaning the air of a 150 square foot bedroom, you should get a device with a CADR rating of at least 100.

When choosing a good air cleaner for your Audubon home, make sure you do your research and choose on the best possible option for the space you need to clean. MERV and CADR allow you to do this. If you have any questions about what air cleaner is right for your home, call Cool It Heating and Air Conditioning!

Tags: , , , ,
Posted in Services | Comments Off

Concordville Heating Repair Tips: Furnace Air Flow Problems

Friday, February 3rd, 2012

Whenever you notice furnace air flow problems in your Concordville home, you can usually do a little troubleshooting and solve the issue on your own. Most air flow problems can be fixed easily and quickly. Here are a few guidelines to get you started, but if you need help or notice other problems with your furnace, call a qualified Cool It Heating and Air Conditioning heating technician.

Furnace Filters:
Checking the furnace filter is the first step you should take when there are any issues with your furnace, but especially with air flow problems. If a filter is dirty enough, the furnace will not come on at all. Ultimately, a clogged or dirty filter restricts the air flow, and this is the source of air flow problems ninety percent of the time.

Supply Registars and Cold Air Returns:
Once you’ve replaced or cleaned the filter, check your cold air returns, which are the vents that draw in the cold air in forced air systems. When a cold air return is blocked  by furniture or other obstructions, they cannot draw in enough air to allow the furnace to put out an adequate amount of hot air. Make sure they are open if nothing is blocking them.

Next, check your supply registers, which are the vents that supply the warm air, and make sure they are open as well. Whenever your heat is on, all of your supply registers should be open. Closing some vents will not increase the air flow in other vents in the house. Closing off one or two in areas where heat is not always needed will not hurt your system; however, when you close too many supply registers, it can cause problems with the ductwork and eventually damage the furnace if the air pressure is not correct.

Clean Your Vents:
You should have a qualified HVAC technician professionally clean your ducts and vents at least once a year, which is another reason it’s important to schedule annual maintenance visits. A professional cleaning is typically part of the yearly heating system inspection. You can help by vacuuming your vents regularly, particularly during the months the heating system is not in use, or at least before you turn it on in the fall. Simply cleaning your vents can help air flow and extend the life of your entire heating system.

If you continue to experience air flow problems, call a certified heating technician at Cool It Heating and Air Conditioning. There could be a more serious issue, or if you have a newer furnace, your original ductwork could be the wrong size for that furnace model.

Tags: , , , , ,
Posted in Services | Comments Off

Malvern Heating Repair Guide: Condensate Drain Line Freezing Problems

Monday, January 30th, 2012

As you know, the condensate produced as byproduct during normal operation of your furnace has to be drained away. It’s toxic, very acidic and has been contaminated by the normal combustion that takes place in your Malvern home’s furnace, so you certainly don’t want it hanging around.

The typical solution is to have it drain out through a drain pipe, usually beneath the floor of your basement foundation, or down the side of your home and out through a downspout. But have you ever had your condensate line freeze up on you? That is no fun chore to deal with.

A frozen condensate line is usually caused by poor insulation. What happens is that when the temperature drops, the rate of drainage begins to slow down and the droplets begin to freeze one by one, like icicles, until the whole pipe is frozen. This creates obvious problems and can interfere with the proper heating of your home.

Usually, this just means the pipe is poorly insulated, which is a solution that can be remedied. If you have a condensate drain line that freezes anywhere other than under the foundation – for example, one the runs down the side of your home – you can try wrapping it in heat tape.

Sometimes, the best way to rectify the situation once and for all is to reroute the pipe. This can be a somewhat involved process, depending on where the drain line is. For example, if the pipe is poorly insulated because it is buried to shallow beneath the foundation, it will have to be dug up to be rerouted along a warmer path.

If you have already tried insulating the pipe with heat tape or some other solution, but the freezing problem continues to occur, then rerouting is probably your best option. For that kind of job, the average Malvern homeowner should consult with a professional, as the job can get challenging and a little dangerous.

It will be worth it to not have to deal with that freezing drain line anymore, though.

Tags: , , , , , , ,
Posted in Services | Comments Off

How to Maintain High Efficiency Filters to Reduce Stress on Your West Chester Heat Pump

Monday, January 2nd, 2012

The filter on your heat pump is an integral part of your West Chester home’s comfort system. Without that filter, the device will quickly be subjected to an influx of debris and contaminants that can get into the machinery and the air being filtered into your home. As a result, you need to make sure you properly maintain the filters to reduce stress on your heat pump.

Change Your Filters

High efficiency filters are designed to remove as much of the airborne contaminants in the air as possible. This is fantastic for keeping your indoor air clean. But if you don’t properly maintain the filter, air quality can worsen and your heat pump is put under unnecessary stress. Specifically, the extremely tight knit filter, designed to stop nearly anything from getting through, gets clogged.

Now your heat pump is forced to work much harder to draw the air it needs from outside and heat or cool your West Chester home. On top of that, the filter is filled with contaminants that can start to leak back into the air supply, actually making your indoor air quality worse than it would be otherwise. That’s why it is so important to clean your filters on a regular basis (for permanent filters) and replace them if they are one time use.

Recommended Filters

You have options as to which types of filters you use for your heat pump. Filters come in multiple options, from super high MERV rated filters that trap up to 99% of all contaminants as small as 0.3 microns.

Electrostatic filters are especially efficient because they extract contaminants of all types – from dust and mold to smoke and gas fumes. A good filtration system should effectively remove anything from the air without needing replacement too often.

Permanent filters tend to offer the best protection against airborne contaminants and generally need to be cleaned once a month. HEPA filters are often permanent and while each filter is different, these are often extremely effective at minimizing contaminants in the air without putting stress on your heat pump.

Tags: , , , , , ,
Posted in Services | Comments Off

A Question from Folsom: Why Does My Furnace’s Pilot Light Keep Going Off?

Wednesday, December 21st, 2011

If you have an older furnace with a gas pilot light and it keeps going out, heating your Folsom home can become a frustrating process. Not only are you forced to trudge downstairs to light it every time you need heat, but you’re probably starting to worry that there is something wrong – either with your furnace or with your gas supply. Here are some possible reasons for your pilot light shutting off and what you can do about them.

  • Thermocouple – The thermocouple is used to generate electricity from the gas being burned by the pilot light to power the sensor that keeps the pilot light running. So, if the thermocouple goes bad or gets blocked in some way, the sensor won’t work properly and your pilot light won’t remain lit. Even a small problem with the thermocouple can lead to the valve closing and the pilot light going out.
  • Gas Pressure – If the gas pressure going to your furnace is too low, due to a leak, pipe problem or another appliance, the pilot light may not have enough gas to stay lit. While it is possible that the problem is not related to gas pressure, anything that affects the flow of gas into your home should be inspected by a professional. If you smell gas, leave the house and call your gas company immediately.
  • Mercury Sensor – The sensor in your pilot light that maintains the flow of gas to keep it lit can go bad. Keep in mind that these sensors almost always used to contain mercury (and often still do), so you should be careful with them. It’s best to call a professional who can replace and dispose of it properly.
  • Dirty Burners – Excess dust, lint, rust or sulfur build up can result in blockage of the burner holes. When this happens, gas will flood into the chamber but not light right away. When it does finally light, it will create a small boom or banging sound that will often put out the pilot light. Not only is this inconvenient, it is very dangerous. Fortunately, it can be avoided with annual cleanings of your furnace.

The best way to keep your pilot light lit at all times is to have someone inspect it once a year. If something happens in between, you can usually rule out cleanliness issues and call in a professional to check the thermocouple and sensor.

Tags: , , , , ,
Posted in Services | Comments Off

How to Handle Your Finicky Narberth Heat Pump

Friday, December 16th, 2011

Your Narberth home’s heat pump is designed to keep you comfortable. Warm weather, cold weather – it doesn’t matter. It should turn on when you need it and turn off when you don’t. So, when the device starts turning on and off without reason or when you need it to stay on, what exactly is the problem and how can you fix that problem without losing the heating or cooling capacity of your device.

Common Causes of the Problem

There are a number of reasons why your heat pump would turn off shortly after turning on, and most of the time this occurs in heating mode. If it occurs in cooling mode, you should have the device inspected immediately because there is likely something wrong with a core component like the compressor. For heating mode issues, here are some common problems:

  • Dirty Coils – If the coils are dirty, the device won’t be able to properly operate, especially if it has been some time since the last cleaning. Both sets of coils need to be cleaned at least once a year to avoid this becoming a problem.
  • Low Refrigerant Charge – If the refrigerant gets low, you’ll need to have it recharged because the pressure in the device will drop and it will therefore turn off after a few minutes of use.
  • Defrost Timer – If the defrost timer is forcing the device into a defrost cycle too often (usually it is set to 30, 60, or 90 minutes), the fan might turn off every few minutes after turning on. This is a common problem and is usually due to a thermostat or switch issue which can be fixed relatively easily.

Another thing to ask yourself when this problem occurs is whether the device is heating properly when on. Defrost timer issues don’t usually impinge on the heating ability of the device, while low refrigerant can. You want to make sure the device is working properly when on and not just cycling on and off without heating capacity.

Based on what you find, you’ll need a technician to take a closer look and ensure everything is working properly. Most repairs for this type of problem are relatively simple.

Tags: , , , ,
Posted in Services | Comments Off

Things You Should Have Inspected in Folsom

Friday, September 30th, 2011

Life would be great in Folsom if we could just depend on things to work and last without requiring any sort maintenance or upkeep. Unfortunately, that is not the case. As good as modern manufacturing and engineering are, our devices, appliances and machines still need attention in order to stay in peak condition.

The Body Is a Machine

To illustrate this, think about the human body. We put a lot of wear and tear on ourselves, which can lead to minor illnesses, injuries and the like, especially when combined with the effects of aging. One way we attempt to stay ahead of the game is to get an annual physical. Once a year, we pay a visit to our doctor to make sure everything is in tip top shape. He checks everything out, lets us know what’s going on, helps us treat anything that may be acting up and then off we go, ready to go for another year.

And So Is Your Furnace!

Likewise, your furnace needs annual attention as well. Although newer electrical furnaces can go up to three years without regular maintenance, gas and oil models should be inspected every year, as should older systems. During an annual inspection, an HVAC professional will:

  • Clean out fuel lines, keeping every flowing freely and efficiently.
  • Check for parts that are wearing out or need to be replaced.
  • Clean and inspect the heating ductwork as well as the vents.

These simple and routine maintenance tasks can extend the life of your furnace by years, keeping your home warm and your heating costs low.

The Best Time for Inspection

The best time to get your furnace inspected is in the late summer to fall months. Although you may still be trying to squeeze every bit of enjoyment from those last warm days, the cold weather comes not far behind, and you will want your furnace ready when that happens. A fall inspection ensures that your furnace will be all set when those temperatures start to drop, so your family won’t have to tolerate any chilly nights.

Annual maintenance is important for health and longevity, both for you and your furnace. You can even schedule your physical and your furnace inspection around the same time so you don’t forget. Make an appointment for your car while you’re at it, too. That makes three things you won’t have to worry about during those cold winter months.

Tags: , , , , , ,
Posted in Services | Comments Off

A Simple Household Cleaning Tip From Folsom: How to Maintain Good Indoor Air Quality

Monday, August 22nd, 2011

There are a lot of reasons to clean. Guests, children, pets, simple peace of mind – without the right amount of cleaning, a messy Folsom house can quickly get out of control. But, don’t forget the health benefits of removing excess dust and sediment from your home with regular cleaning. To ensure your indoor air quality doesn’t take an unnecessary hit, here are a few basic cleaning tips you can implement right away.

  • Regular Vacuuming  – Most people vacuum occasionally when it’s obvious that carpets are getting a little messy. Consider increasing the frequency of your vacuuming to at least 3-4 times per week, possibly more, especially if you have pets. Regular vacuuming removes a lot of the airborne particles that can get into your lungs and cause allergies or asthma flare ups.
  • Remove Junk from Floor Spaces – Toys, garbage, clothes, and other random junk sitting on the floor can create air quality problems, especially if they are near or around vents.
  • Bathe and Brush Pets – Pet dander is a top contributor to indoor air quality problems. Bathe and brush your pets once a week to reduce hair loss and get rid of all that excess dander that builds up over time. Consider it an investment in the cleanliness of your home.
  • Shoes Outside – Shoes bring in pollen and other outdoor pollutants. Take them off outside and you will reduce the number of contaminants that make it inside.
  • Remove Moisture from Bathrooms – Bathroom moisture results in mold growth and the development of other allergens. Wipe down the walls of your shower and mop the floor daily to remove excess moisture after showers.
  • Food Waste – Throw away food waste immediately. Food in the sink or garbage can attracts bacteria and bugs and can result in mold growth very quickly. Consider a compost bucket or pile outside where food waste can be disposed or purchase a garbage disposal to get rid of it immediately after eating.

There are dozens more little things you can do that will reduce the amount of allergens and pollutants that build up in and around your home. Consider creating a simple calendar schedule you can follow from day to day to keep your indoor environment clean and healthy. If you have more questions about how maintain good indoor air quality, contact your local professional.

Tags: , , , ,
Posted in Services | Comments Off

« Older Entries