Posts Tagged ‘Air Conditioning’

Springfield Air Conditioning Tips: How to Troubleshoot a Failed AC Unit

Monday, May 14th, 2012

In most cases, a failed air conditioning system may be fixed by going through some troubleshooting guidelines. If you would like one of our Springfield air conditioning technicians to help you get your AC unit running again, give Cool It Heating and Air Conditioning for assistance. We can also send someone to your home if we can’t get your system working again.

Here are some basic steps to try before you call for a repair.

Check All Controls and Fuses

When your air conditioner won’t cool your home properly, always check the thermostat to see if it is on “cool” and set for the right temperature. If the air conditioner has shut down, check to make sure that the unit is receiving power by looking in the fuse box for a flipped circuit breaker and also making sure it is plugged in properly. You can also inspect the visible wires and electrical components for obvious damages. Call a TOWN NAME air conditioning technician if you see physical damage to the electrical components. Never try to fix this yourself.

Sometimes when there’s extreme weather conditions in the summer, such as very high temperatures or high humidity levels, the high-pressure switch can get flipped and turn off the air conditioner. You can easily find the switch on most AC models in the compressor’s access panel. Check your owner’s manual or call us if you don’t know how to locate or reset the limit switch.

Check for Refrigerant Problems or Condensate Pan Leaks

Refrigerant problems caused by the wrong amount of refrigerant can keep the AC unit from cooling your home properly, and you can usually tell if there’s a refrigerant issue by looking for frost or icing on the evaporator coil. When there’s excess coil icing, it means that there isn’t enough cool air being delivered to your home. If you see thick frost on the evaporator coil, a technician will most likely need to charge the refrigerant, or there could be a leak in the refrigerant line.

Condensate leaks into the condensate pan can also cause an air conditioner to fail. The condensate drip pan is installed underneath the air handler to catch condensate leaks if the drain system gets clogged. Most of the time, a small clog in the drain line can be easily cleared. Also check the condensate switch for issues; sometimes these can be defective and cause your air conditioner to shut down.

At Cool It Heating and Air Conditioning, we want to be the only Springfield air conditioning contractor you’ll ever need. Call us any time to get troubleshooting advice for your AC system.

Media, PA 2nd Saturday Arts Stroll

Friday, May 4th, 2012

Media Art | Media | Cool It HVACThe 2nd Saturday Art Stroll in Media, PA is a free family event. Enjoy over 30 vendors and businesses, “From 6:00 to 9:00 pm, shops, galleries and cafes host local musicians or display the work of local artists”. Experience the talents of local artists and musicians as you stroll State Street.

Cool It HVAC provides heating, air conditioning, and indoor air quality services for you and your family in the Media, PA area. For a list of all our service areas in Delaware and Chester Counties, see our service areas page.

Save Energy and Save Money This Summer in Media

Monday, April 23rd, 2012

Though we hate to admit it, we all do it without thinking: turn the AC higher instead of turning on a fan, or forget about the thermostat settings which are set to full-blast when we are not at home.  Oftentimes it is the simple things which can have the most impact, and with saving energy this is true as well.

Households throughout the US will spend somewhere between $1,200 and $2,200 per year on energy costs.  With the cost of living in many areas of life skyrocketing, it’s nice to know there are some easy ways to lower at least one household bill: the energy bill.  Of course, some of these fixes are free, and some cost a little time and energy, while others must be paid for as long-term investments.

 Free, Do-It-Yourself Energy Solutions

These quick and easy, do-it-yourself, no cost solutions produce energy saving results almost immediately!

  • Adjust your Media air conditioning thermostat to higher numbers, such as 78 while at home and 85 or higher when away.  Supplement AC usage with a ceiling or room fan, as moving air feels cooler on the skin.
  • Eliminate wasted energy by turning off appliances, lights, and equipment when not in use, unplug electronic chargers when not in use, and get rid of spare appliances such as refrigerators which are plugged in but not in use.
  • Put those dishwashing gloves away and let the dishwasher do the dirty-work!  Dishwashers use less water than washing by hand.  In addition, let the dishes air-dry rather than running through the heat-cycle to save even more.
  • Do laundry more efficiently by washing and rinsing in only cold water, and line dry instead of using the dryer.
  • Use the microwave to cook and not only speed up the cooking process, but use two-thirds less energy than a stove or conventional oven.

 Low-Cost, Economical Energy Solutions

Most of these energy saving options can be procured at the local hardware store, are fairly inexpensive, and can be easily done by any competent home-owner.

  • Replace HVAC filters regularly, according to manufacturer’s specifications.
  • Weather-proof your home by plugging air leaks on doors and windows with weather stripping, sealant, or caulk where applicable.
  • Purchase and install ENERGY STAR® certified products such as porch lights, floor and table lamps, pocket lights, and even programmable thermostats to ensure energy using items are using as little energy as possible.

 Invest in Energy Solutions

If it is important to you to save energy and money long-term and on a larger scale, there are a number of durable energy-saving investments to consider.

  • Purchase new windows, a new air-conditioning unit, refrigerator, or other household appliances which use less energy than older units
  • Install window and house shading such as patio covers, or strategically plant trees to shade the home during peak times of heat
  • Install a whole house fan which can suck cool air into the home after sundown or in the early morning in order to cool the entire house thus reducing air conditioning usage
  • Seal and insulate all household ducts in crawl spaces and attics
  • Increase or upgrade attic insulation to higher than the standard grade to keep housing temperatures more constant

To save energy also means to save money, and by following any of the simple steps listed above the average consumer can save energy and save money almost immediately. For more ways to stay this summer cool  in Media, call Cool It Heating & Air Conditioning

We love hearing from our customers!

Friday, April 13th, 2012

We love receiving feedback from our customers. Please feel free to contact us at any time! We asked the following customers to tell us what they thought of our quality, cleanliness, communication, value, and timeliness.

Rich Davis & Megan Prucnal has the following to say about Cool It:

“Cleanliness

Both Days the work Area was Cleaned up well!

Communication

Technicians were great in explaining where they were in the process when I checked with them during the day. They showed me all the new components and thermostat when they finished the job.

Value

Good Value for the Boiler installed and work they performed!

Timeliness

Very quick response when I was ready to go forward and job was scheduled with in the time frame I was given.”

Media | Positive Reviews | Cool It Heating and Air Conditioning

Sarah Abate had the following positive comments:

“Quality

Quality of work was very satisfactory!

Cleanliness

Joe and Tom were very neat an had their shoes covered when ever coming in from outside. They also left basement in order.

Communication

Everything was explained thoroughly Joe & Tom let me know what was going on as they went along.

Value

The Heater was in line with what we priced

Timeliness

Work was completed by 4:00 pm, I don’t think they even had Lunch!”

What to Do Before Turning on Your Media AC for First Time

Monday, April 9th, 2012

The weather is starting to heat up and you are eager to flip the switch on your Media air conditioning system for the first time. It’s been sitting there since spring, waiting to be used, but now you wonder if there are any tasks that should be completed before its first use. Depending on the type of system you had installed there are a few things you should keep in mind before you cool down your house. They include:

  • Media Air Conditioning MaintenanceOutdoor Cleaning – You need to make sure that your outdoor unit is clean and clear of debris before you turn on your AC. Brush off any leaves and check under the cover to clear out anything that might have gotten beneath it. You should also take a look at the supply registers to make sure they are clear.  It is also a good idea to replace your air filters.
  • Check Your Thermostat – You should make sure that your thermostat is functioning before you start using your air conditioning system. A simple way to check is to set your system to auto-cool and lower your thermostat to a few degrees below the current room temperature. Your air conditioner should turn on to cool the room; if it doesn’t, have a professional come out and take a look at your system.
  • Clear Away Winter and Spring Dust – Now that your system is running, make sure you check the filters for any buildup of dust that was in the ductwork. Over the off season, your ducts might develop a layer of dust and debris, especially if your heating system doesn’t make use of them. The filters might clog quickly as a result.
  • Check for Water Leaks – Your condensate overflow drain should work properly as well – check for any potential leaks during the first 48 hours of operation. Even a small leak should be checked immediately to avoid potential problems as summer cooling season kicks in.

If you notice any problems other than those listed above, you should call a service professional immediately. Ideally you will have your system inspected in early-mid spring to ensure it is ready for the summer, but even so problems can develop between inspection and first running. Electrical issues especially should be checked immediately.

 

Join the Cool It Team

Friday, April 6th, 2012

Are you looking for a career in the heating and cooling industry? Cool It Heating and Air Conditioning is looking for Installers and Technicians to help us serve customers in Chester and Delaware County PA.

Joining the Cool It team means upholding our 100% Satisfaction Guarantee. The qualified professional technicians that we employ represent Cool It in the customer’s home and must provide top level customer service. All of our team members undergo extensive ongoing training, are drug tested regularly, and go through a full background check before entering customers’ homes.

Southeastern PA | Cool It Heating and Air | Technicians

If you think you would make a good addition to our team please apply using our Careers page.

The Energy Star Label: A Tip From Thornton

Monday, September 19th, 2011

The Energy Star program is a joint program of the Environmental Protection Agency and the US Department of Energy. The program’s goal is to help consumers, such as Thornton homeowners, save money and protect the environment through energy-efficient products and practices.

The best-known aspect of the Energy Star program is the Energy Star label, which is awarded to appliances and other items that are significantly more efficient than average. Energy Star efficiency guidelines vary depending on product category, but in general, Energy Star products use 20%-30% less energy than minimum federal standards.

The Energy Star guidelines were designed both with energy efficiency and performance in mind. While low energy use is one of the most important criteria for selecting Energy Star appliances, product performance, features, warranty, safety, and durability are also taken into account. Price is also a factor: if a product costs significantly more than other products in its category, it will only receive the Energy Star label if the up-front cost will be recovered through savings in operating costs within a reasonable amount of time.

The first Energy Star labels were given to computers and monitors in 1992. Now labels can be found on many other products, including:

Energy Star products can be found wherever appliances and electronics are sold. Look for the blue and white Energy Star label. You can also look for the yellow EnergyGuide label that is affixed to most heating and cooling systems and household appliances. This label is created by the Department of Energy and shows a product’s annual cost of operation compared to similar models. It will often indicate whether a product is Energy Star.

It’s important to note that while an Energy Star label indicates that a heater, air conditioner, or household appliance is more efficient than the minimum guidelines, it does not always mean that you are getting the most energy efficient option on the market. If you are making a major appliance purchase, use the Energy Star label to be sure every model on your “short list” is energy efficient. Then, look carefully at the EnergyGuide label to compare the efficiency of the models you are considering.

The EPA has also extended the Energy Star label to cover new homes and commercial and industrial buildings. To qualify for the Energy Star rating, a new home must use at least 15% less energy than standard homes (built to the 2004 International Residential Code). Energy Star homes usually include insulation, high-performance windows, energy-efficient heating and cooling systems, appliances, lighting, and water heaters.

The Energy Star standards and label have been recognized in many other countries, including Canada, Australia, Japan, New Zealand, Taiwan and the European Union.

Do Heat Pumps Work for Air Conditioning?A Question From Brookhaven

Monday, September 5th, 2011

It’s possible that in the course of your search for a new air conditioning system in Brookhaven, you read or were told about heat pumps. Doesn’t sound right, does it – heat pumps providing cooling for your home? Regardless of the seeming misnomer, heat pumps are actually much older and more reliable cooling technology than you know. And once you understand how these units work, the name makes much more sense.

What Is a Heat Pump?

Technically every refrigerant containing air conditioner is some form of heat pump. A heat pump is a device that removes heat from one area and transfers it to another. So, in the case of your air conditioner, warm air cycles into the condenser, the heat is removed, and the cooled air is circulated back through your home. The actual science behind this is slightly more complicated, but the gist is simple – cold air isn’t produced and then pumped into your home; warm air is removed.

Your refrigerator and freezer operate under the same principle. It works so well that it’s been a standard technology for nearly 100 years, albeit with quite a few upgrades and enhancements. So, if an air conditioner already is a heat pump, why are these devices called something different? Because heat pumps can do so much more.

Heat Producing Heat Pumps

A true heat pump can work in two directions. It can extract heat from your home or it can extract heat from outside and pump it into your home. A true heat pump offers year round climate control because it both heats and cools – not too shabby if you think about the cost of a furnace and central AC system. And with modern green technology, heat pumps can even be connected to geothermal systems that draw their energy from the earth – saving a tremendous amount of money.

So, back to the main question – should you purchase a heat pump for your air conditioning needs? The short answer is “it depends”. For the most part, a heat pump is comparable to the same air conditioning model in terms of energy efficiency and capacity. The major difference is its ability to heat your home. So, if you are interested in ditching the furnace or boiler, it may be a great upgrade. If not, a standard air conditioner can get the job done equally well.

Why Are Cleans Filters So Important to AC Efficiency? A Question From Swarthmore

Friday, September 2nd, 2011

As everyone in Swarthmore knows, air conditioners can cost a lot of money to operate – especially when they don’t work at 100% efficiency. So, it is important to perform the various regular maintenance tasks that ensure the system uses as little electricity as possible. The first thing on your list (and the easiest) is cleaning those filters.

Keeping Filters Clean

The Department of Energy’s Energy Savers website states that you can reduce your air conditioner’s energy consumption by as much as 15% simply by keeping the air filters clean. Why do they matter so much? Consider the nature of a filter.

The filter on your AC unit is designed to capture any dust, debris and sediment in the air supply. If that dust and sediment was allowed in, not only would it gum up the mechanical workings of the device, it would get into your ductwork and reduce the air quality of your home. So, filters are used to capture such things. However, when a filter gets clogged, the system must work harder to draw the air in. As it works harder, the motor turns faster and more electricity is used.

It takes very little to clog the filter of an AC unit, especially if it is running 24 hours a day for two or three months out of the year. So, it’s best to check your filters once every 30 days regardless of what type of filter you are using.

Which Filters to Check

The main filter on your AC unit should be checked along with any air handler filters and any air cleaner filters you have installed in your system. Another thing to consider is the condition of your home and the area around your outdoor condenser. If you have pets, lots of plants or your condenser is located in a dusty area, you may need to check and change those filters even more often.

Most filters are located along the return length of the ductwork – sometimes in ceiling ducts and walls, though they may also be located in your furnace’s air handler or inside the air conditioning unit. If you have window units or mini splits, the filters are frequently in the unit.

Clean air filters are important for your health, your wallet and the longevity of your AC system. Stay on top of them and you will save money in more ways than you might expect.

Choosing an Environmentally Friendly Refrigerant for Your Air Conditioner: A Guide From Wallingford

Wednesday, August 31st, 2011

For years in Wallingford, we have heard about how bad air conditioners are for the environment. Specifically, the liquid used in them to remove heat from air in your home tended to eat holes in the Ozone layer. Today however, air conditioners (along with every other appliance or device that uses refrigerant) have been upgraded to work with newer, better chemicals.

R-22 Refrigerant

While R-22 refrigerant is still used in devices sold today, it is being gradually phased out. According to the Montreal Protocol, R-22 refrigerant will no longer be allowed in new devices as of January 1, 2020 in the United States (though it can be used to service existing devices via recycled or reused refrigerant). While the most environmentally damaging refrigerants such as HCFC-141b have been removed from the market, R-22 is still considered harmful to the environment if allowed to enter the atmosphere.

R-410A Refrigerant

So, if R-22 will soon not be permitted (and is not an environmentally friendly option), what is? Currently, the most common refrigerant used in new residential air conditioners is R-410A. After the Clean Air Act was passed, the EPA reviewed a number of refrigerants to determine which were the least damaging to the environment (and human health) and which could be used as alternatives to R-22. At the top of the list is R-410A, a blend of different HFCs that don’t deplete the ozone. Sometimes called Puron, Forane, or Genetron AZ-20, R-410A is a good choice if you’re having a new system installed.

Other Alternatives

Of course, because R-410A is a hydrofluorocarbon, it does contribute to global warming and therefore is a risk to the environment, albeit in a much smaller capacity than older refrigerants. Recently, the EPA approved the use of HFO-1234yf – a chemical that pollutes 99.7% less than the current refrigerant used in car air conditioners. Whether it will be used in homes and commercial spaces remains to be seen, but the technology is advancing rapidly, allowing us to stay cool without sacrificing our planet’s health and future to do so.

Another alternative is to invest in an evaporative cooling system rather than a traditional air conditioner. These systems use no HFCs at all and therefore have zero impact on the ozone layer or global warming (other than the electricity they consume). They also use 80% less energy than traditional air conditioners. If you live in a dry, low humidity climate they are a great option. If you have more questions about environmentally friendly HVAC equipment, contact your local HVAC professional.