Archive for March, 2012

Springfield Heat Pump Question: What is the Emergency Setting on My Heat Pump?

Monday, March 26th, 2012

While installing or inspecting your Springfield heat pump, you may have noticed that little switch or button labeled something like “Emergency Mode.” And then, you probably scratched your head and thought, “what is that for?”

Hopefully, the emergency setting is not something you will ever have to use. But, it is there for a reason, so it’s possible you may have to resort to it at some point. In that case, it makes sense to know what it is first.

Springfield Heating Repair- Air Source Heat PumpYour emergency setting is what turns on when your Springfield heat pump starts malfunctioning. The compressor will turn off so the heat pump is no longer transferring heat from the outside into your home as it normally would. Instead, the internal heating element comes on to provide your home with minimal heat until the device is working again. However, since your heat pump is now using electric resistance heating to heat your home, it is using a lot more energy. This can be very expensive, so it is best to have your heat pump fixed as quickly as possible.

That’s what the emergency setting is, but when would you use it?

It’s not a trick question. As the name implies, you only want to use this setting in an emergency. For example, if the heat pump has frozen and isn’t operating, the best course of action is to switch on the emergency mode and call a Springfield heating and air conditioning professsional to repair it.

You would also want to use the emergency mode when recovering from a power outage. Any time a heat pump is without power for more than thirty minutes the refrigerant can cool and get too thick to properly flow through the coils. Turning the pump back on in this situation can damage it, so instead you would use the emergency mode for a while to warm the refrigerant back up, then return to operating the heat pump normally.

The emergency setting is not to be used in place of a supplemental heating system. If there is an uncharacteristic cold snap, and your heat pump can’t keep up, then it makes sense to use the emergency setting to keep the house warm. However, if you live in a colder northern climate, where temperatures routinely drop below 30 degrees in the winter, you should have a supplemental heating system in addition to the heat pump. Using the emergency heat setting regularly is not a good idea.

For more information about maintaining your home’s heat pump, give Cool It Heating & Air Conditioning a call today!

Photo by k_lis: http://www.flickr.com/photos/krzlis/6589545719/

Tags: , , , , ,
Posted in Services | Comments Off

Media Heating Installation Tip: Heating Upgrades and Home Energy Audit

Wednesday, March 21st, 2012

Considering an upgrade to your Media heating system? It’s usually a sound investment that generates savings both in heating costs and repair bills, plus it keeps your family happy and comfortable.

Before you take the plunge on new equipment, though, you may want to get a home energy audit. What you find may help you choose the right system.

A home energy audit is essentially an inspection by a professional of the materials used to insulate your home. This includes not just the insulation in the walls, but also the walls themselves, along with windows, doors and so on. The idea is to figure out how much heat is escaping your home to the outside, so an audit may also include looking at ducts, vents or anywhere else where air could flow through.

So what does an energy audit have to do with your Media heating upgrade?

Think about it like this. There are two ways to make your home warmer: increase heat gain (e.g., get a more efficient heating system) or decrease heat loss. If you are able to do the latter, you may find that the former is unnecessary.

For example, you may get an energy audit and discover that by installing new windows and resealing your doors, you can increase heating efficiency by 10%. This could have big implications for your decision to get a new heating system, as you may decide that you can save money by getting a smaller capacity furnace. Getting the right size furnace is very important; one that is too small will not be able to heat your home to the desired temperature and one that is too large will short-cycle, which leads to uneven heating and wears down your system quickly.

A home energy audit is the first step to getting a new heating system, and one that is sure to save you money.

While we do not provide home energy audits, please give Cool It Heating and Air Conditioning if you have any questions about your new system installation!

Tags: , , , , ,
Posted in Services | Comments Off

Springfield Geothermal Contractor Guide: Installation Steps

Wednesday, March 14th, 2012

Are you interested in geothermal heating for your Springfield home? Are you considering using the natural heating and cooling energy of the Earth as a way to keep your home at a comfortable temperature?

If you are, you probably have a lot of questions, not the least of which have to do with the installation process. You may assume that it is complicated, but in most cases it is quite simple. Here is a simple summary of the steps involved in installing a geothermal system:

  1. The very first step, before any kind of installation can even be planned, is to evaluate the ground on which your home sits to be sure it can support a geothermal system. The area must be evaluated for soil and rock composition, availability of ground and surface water and availability of land.
  2. Once you have determined that your yard can handle a geothermal system, it is time to choose the type of system you need. This depends a lot on the evaluation from step 1, as well as some other factors. For one example, if you have very little land available, you may need to opt for a vertical loop configuration. For another, if you are fortunate enough to have a small body of water on your property, you can take advantage of a pond loop installation.
  3. Your contractor will dig and/or drill trenches for placement of the geothermal pipes. Try not to be nervous. They will disrupt your yard as little as possible.
  4. With the trenches prepared, pipes can be placed in accordance with the configuration you chose.
  5. Your contractor will fill the trenches back in to cover the pipes loosely. You may want to work with a landscaper to fully “re-assemble” your yard where the pipes were installed.
  6. Finally, the installation team will hook up the geothermal system to your home, make any necessary final adjustments, and you are good to go!

If you’re interested in geothermal heating for your Springfield home, consider contacting Cool It Heating & Air Conditioning today to discuss the installation process for your home.

Tags: , , , , ,
Posted in Services | Comments Off

West Chester HVAC Guide: Different Types of Furnace Filters

Wednesday, March 7th, 2012

A good filter for your West Chester home’s furnace is a must. Because that device heats and blows air throughout your home, you want to be sure that it doesn’t recycle contaminants and bacteria that could easily be captured at the air handler. That’s why it’s vital to choose the right furnace filter on the first try. Here are some furnace filters to consider and their various benefits to your home and family:

  • Electrostatic – Most electrostatic filters are permanent and must be washed on a regular basis. They are electronically charged to capture particles as they pass through, much like a magnet. These filters are effective because they are both physical and electronic. However, keep in mind that they are only as efficient as the cleaning they receive.
  • HEPA – HEPA is the highest rating available for a filtration system, removing up to 99.9% of all particles as small as 0.3 microns. However, they are also inefficient when used in furnaces as they severely reduce air flow. They are not often recommended for this reason.
  • Pleated – Pleated filters come in both reusable and permanent forms and can be either purely mechanical or electrostatic. There is a very wide range of efficiency ratings for pleated filters so make sure you analyze your home’s specific needs before selecting any one pleated filter.
  • Activated Carbon – Activated carbon is unique from the other three filter types because it effectively removes fumes, odors and chemicals from indoor air along with other larger particles. It is recommended that if you choose an activated carbon filter, you supplement it with a pleated or electrostatic filter (or choose a combination filter) to remove all unwanted components from your home.

There are a lot of options when it comes to furnace filters. To make sure you get only the best air quality, talk to Cool It Heating & Air Conditioning who can help you determine which pollutants are the biggest problem in your home.

Tags: , , , , ,
Posted in Services | Comments Off